Skip to content
Call (803) 220-0101
3625 Centre Circle, Ste C
Fort Mill, SC 29715

02News & Insights

GoFog Humidity Control: Built Around Your Preferred VFD, PLC and BMS

GoFog humidity control systems use high-quality components as standard, but they aren't locked to one brand. Each system can be built with the variable frequency drive (VFD), programmable logic controller (PLC) and building management system (BMS) protocol your facility already uses.

GoFog, Inc. Product News Published Updated September 2026 2 min read

GoFog two-door control panel with touchscreen operator interface, pilot lights, selector switches, emergency stop and disconnect handle

Why does control hardware matter on a fog humidifier?

A high-pressure fog system relies on its controls. On GoFog pump units, the VFD provides a soft start and holds the 1,000 psi operating pressure as the system modulates output, while the PLC sequences the pump and staging valves in response to a BMS demand signal. Using the same drive and PLC brands found elsewhere in your facility means your technicians already know the hardware, spare parts are easier to stock, and the humidifier fits your existing maintenance program.

Open GoFog pump unit control panel showing the PLC, DIN-rail terminal blocks and wiring, and two ABB variable frequency drives, with the pump motor on the frame below

Which VFD brands can GoFog use?

GoFog's standard control system uses ABB VFDs. If ABB isn't your preference, GoFog regularly builds systems with Allen-Bradley, Yaskawa and drives from other major suppliers.

Which PLC platforms are supported?

Many facilities standardize on a single PLC platform. If your site depends on Rockwell Automation, Siemens or another manufacturer, GoFog can build the humidifier controls around it.

How does a GoFog system connect to the BMS?

Every GoFog humidification system integrates with your building management system using the communication protocol you choose. GoFog pump units support Modbus, BACnet, LON and others, so specify the protocol your BMS needs at the time of order. The BMS sends the humidity demand signal, and valve staging racks turn it into precise stages of humidifier output. For monitoring outside the BMS, see Sentinel remote monitoring.

Custom-designed for your facility

Every GoFog humidification system is custom designed to fit into your facility and to be easy to service and control. To specify controls for your project, contact GoFog or call (803) 220-0101.

02FAQ

Frequently asked questions

Can a GoFog humidifier use a VFD brand other than ABB?

Yes. GoFog regularly builds control systems with Allen-Bradley, Yaskawa and other major VFD suppliers when a facility has a preferred brand.

Can GoFog use my facility's standard PLC?

Yes. If your site standardizes on Rockwell Automation, Siemens or another PLC platform, GoFog can build the humidifier controls around it.

Which BMS protocols does a GoFog system support?

GoFog pump units communicate over Modbus, BACnet, LON and other protocols. Specify the protocol your building management system requires when you order.

Have a project in mind?

GoFog engineers will review your application and provide a custom design and free quote.