
What does a large fog humidification system need from its pumps?
For small loads, the GoFog Pico Pump Rack keeps humidification affordable. Large applications are different: they can require thousands of pounds of water per hour.
These projects demand a reliable pumping system to supply 1,000 psi water to every nozzle manifold. In critical applications such as laboratories, hospitals and data centers, they also require redundancy to ensure zero downtime.
How does GoFog build redundancy into a pump system?
Choosing the right system is straightforward because every GoFog pump unit can be selected with a pre-engineered redundancy option. Redundant units are:
- Pre-piped and pre-plumbed, ready for connection on site
- Factory tested as a complete system
- BMS-ready, communicating over your required protocol (Modbus, BACnet, LON and others)
- Duty/standby, alternating between pumps and automatically switching over to the standby pump and VFD if a fault condition occurs
Which pump skid fits which load?
Lineup update, October 2026
GoFog's standard pump units now span eight models, from the GFP-800 to the GFP-10K at 10,000 lbs/hr. The model details in this article describe the lineup when it was first published.
See current pump unit specificationsWhen this article was first published, the GFP-6000 pictured above was GoFog's largest standard skid. It used two belt-driven pump units that each provided up to 6,000 lbs/hr at a maximum of 870 RPM. On the smaller GFP-800, GFP-1750 and GFP-3600 systems, the redundancy option used two direct-drive pumps stacked on a powder-coated steel rack for the smallest possible footprint.
| Model | Maximum fog output (lbs/hr) | Maximum pump flow (GPM) | Drive | Maximum pump speed (RPM) | Pump motor (HP) |
|---|---|---|---|---|---|
| GFP-800 | 800 | 1.6 | Direct | 1,200 | 3.0 |
| GFP-1750 | 1,750 | 3.5 | Direct | 1,200 | 5.0 |
| GFP-3600 | 3,600 | 7.2 | Direct | 1,200 | 10.0 |
| GFP-6000 | 6,000 | 12.0 | Belt | 870 | 15.0 |
Values per pump, from the current GoFog pump units specifications. All models operate at 1,000 psi (69 bar).
GoFog's range of pre-engineered pump systems covers 99% of the humidification applications you're likely to encounter, which allows a quick turnaround for you or your client. For a real-world example, see the redundant skid that serves the Harvard University Science and Engineering Complex.
Why run pumps below their rated speed?
All GoFog pump systems are designed for a maximum pump speed of less than 70% of the manufacturer's suggested rating. Running below the rating provides quiet operation and extends the interval between oil changes to every 2,500 hours. For round-the-clock visibility into pump status, pair the skid with Sentinel remote monitoring.
Download the High Availability Pump Systems flyer (PDF) or the GoFog Pump Units flyer (PDF).
Select a pump system for your project
Contact GoFog or call (803) 220-0101 for a pump selection for your project.

