
Why did GoFog develop a small-load pump rack?
As a custom humidifier manufacturer, GoFog sees humidity loads vary greatly from job to job. Some projects require more than 5,000 lbs/hr, while a small print shop or clean room may need 100 lbs/hr or less.
Those smaller projects are difficult because the humidity load is too low to justify the cost of a commercial humidifier and too high for a residential humidifier. The Pico Pump Rack bridges that gap without sacrificing quality. Every unit comes with the components you'd expect on a full-size GoFog pump unit: a PLC, a VFD and a CAT pump, at a fraction of the size and cost. It's also a good fit for smaller office buildings that don't need a full-size system.
What are the Pico Pump Rack specifications?
| Model | Pico-150 | Pico-250 | Pico-375 |
|---|---|---|---|
| Maximum Output (LBS/HR) / (GPM) | 150 / 0.3 | 250 / 0.5 | 375 / 0.75 |
| Operating Pressure (PSI/BAR) | 1,000 / 69 | ||
| Maximum Pump Speed (RPM) | 1,725 | 1,725 | 1,725 |
| Motor (HP) / VFD (HP) | 0.75 / 1 | 0.75 / 1.5 | 1 / 1.5 |
| Weight (LBS) | 90 | 95 | 105 |
| Inlet Water Connection | 3/4″ | ||
| Controller | Horner XL4 OCS with 3.5″ Color Touchscreen | ||
| Overall Dimensions | 24″W x 22″D x 50″H | ||
Download the Pico Pump Rack flyer (PDF)
What else does a Pico system need?
Like every GoFog system, the Pico Pump Rack supplies 1,000 psi water to stainless steel nozzle manifolds, so it needs purified feed water. GoFog selects water treatment for each project, from cartridge filtration to reverse osmosis. For large loads measured in thousands of pounds per hour, see High Availability Fog Systems.
Size a Pico system for your project
Tell us your humidification load and space conditions, and GoFog will confirm whether a Pico Pump Rack is the right fit. Contact GoFog or call (803) 220-0101.

