Skip to content
Call (803) 220-0101
3625 Centre Circle, Ste C
Fort Mill, SC 29715

05News & Insights

ASHRAE Approves the Use of Atomizing Humidifiers in Health Care Facilities

In 2017, ASHRAE released Addendum m to Standard 170-2013, Ventilation of Health Care Facilities, which allowed adiabatic atomizing humidifiers to be used in health care facilities. For hospital owners and operators, it opened the door to a far more energy-efficient alternative to steam humidification.

GoFog, Inc. Press Releases Published Updated September 2026 2 min read

Nurse in teal scrubs with a stethoscope standing in a bright hospital corridor

What did Addendum m to ASHRAE 170-2013 change?

After requests from the health care industry and a thorough evaluation by ASHRAE, Addendum m to Standard 170-2013 was released, allowing adiabatic atomizing humidifiers in health care facilities. This was a major win for owners and operators, who gained an energy-efficient option for humidification.

Standard 170 has been revised since this addendum was published. Always design to the edition adopted by your authority having jurisdiction.

Download the Addendum (PDF)

How does an atomizing humidifier work in a hospital AHU?

An atomizing humidifier, also called a fog system, uses a low-horsepower high-pressure pump to feed 1,000 psi water to atomizing nozzles inside the air handling units (AHUs). The system is modulated by a series of staging valves that turn the nozzle manifolds on and off to match the humidity demand. The heat already in the airstream evaporates the fine droplets, so no boiler or electric steam generator is needed.

What are the benefits of atomizing humidifiers for health care?

  • Low energy consumption: a small pump replaces the energy needed to boil water into steam.
  • Simple to maintain: the system is built around a pump unit, stainless steel nozzle manifolds and staging valves.
  • Clean water: the humidifier uses reverse osmosis water with UV sterilization.
  • No chemical additives: nothing is added to the water that enters the airstream.
  • Easy to retrofit: nozzle manifolds install inside existing air handling units.

Learn more about humidification for healthcare and laboratories.

Get a custom design for your facility

GoFog will provide a custom design for your health care application, complete with equipment selection, specification, energy analysis and quotation. Contact GoFog or call (803) 220-0101.

02FAQ

Frequently asked questions

What is ASHRAE Standard 170?

ANSI/ASHRAE/ASHE Standard 170, Ventilation of Health Care Facilities, sets ventilation requirements for hospitals and other health care spaces, including temperature and humidity design conditions. It is updated periodically, and newer editions have been published since the 2013 edition.

Are atomizing humidifiers allowed in health care facilities?

Addendum m to Standard 170-2013 permitted adiabatic atomizing humidifiers in health care facilities. Confirm the requirements of the edition of Standard 170 adopted by your authority having jurisdiction before you design a project.

What water does a GoFog atomizing humidifier use?

GoFog systems use reverse osmosis water with UV sterilization and no chemical additives. A low-horsepower pump delivers the water at 1,000 psi to atomizing nozzles inside the air handling units.

Have a project in mind?

GoFog engineers will review your application and provide a custom design and free quote.